>Low Temperature Steel
LPA-100
LPA-100 is an all-position extra low hydrogen type electrode for aluminum-killed steel tobe used at low temperature.The weld metal contains about 1.6%Ni.Notch toughness of weld metal at low temperature (-40 ~ -50℃) is stable and good.
- AWS
- A5.5 E8016-G
- KS
- D 7023 DL5016-4AP1
- JIS
- Z 3211 E5516-GAP
- EN
- ISO 2560-A E 46 4 Z B 1 2
ISO 2560-B E5516-N5 AP U
| Applications | Welding of aluminum-killed steel for low temperature used for LPG tankers and LPG storage tanks. |
|---|---|
| Characteristics | LPA-100 is an all-position extra low hydrogen type electrode for aluminum-killed steel to be used at low temperature. The weld metal contains about 1.6%Ni. Notch toughness of weld metal at low temperature (-40 ~ -50℃) is stable and good. |
| Notes on usage | (1) Pay attention not to exceed proper heat-input because excessive causes deterioration of impact values of weld metal. (2) Dry the electrode at 350~400℃ for about one hour before use. (3) Adopt back step method or strike the arc on a small steel plate prepared for this particular purpose to prevent blowholes at the arc starting. (4) Keep the arc as short as possible. |
| Shielding Gas | - |
| Certification | ABS | - | BV | - | |
|---|---|---|---|---|---|
| CCS | - | CWB | - | ||
| DNV | - | GL | - | ||
| JIS | - | KR | - | ||
| KS | - | LR | - | ||
| NK | - | RINA | - | ||
| TUV | - | ||||
| MSDS |  |
Handbook | |
||
| DOP Attachment | |
||||
