>Gouging
CG-100
CG-100 performs on all types of arc-welding-machines.No extra equipment or gases neededIdeal for preparation prior to welding, gouging and removing of old or defective weldsand for removal of excess metal, ferrous or non-ferrous. The cut is smooth and uniform.
- AWS
- -
- KS
- -
- JIS
- -
- EN
- -
Applications | Cutting, chamfering, grooving and gouging of all metals. |
---|---|
Characteristics | CG-100 performs on all types of arc-welding-machines. No extra equipment or gases needed Ideal for preparation prior to welding, gouging and removing of old or defective welds and for removal of excess metal, ferrous or non-ferrous. The cut is smooth and uniform. |
Notes on usage | (1) Hold electrode at an angle of approx. 10±5℃, push in direction of travel using a saw like motion as shown in the sketch. (2) For piercing holes, strike arc and push in and out until hole is completed. (3) Dry the electrodes at 70~100℃ for 30~60 minutes before use. |
Shielding Gas | - |