>Low Temperature Steel
LC-318NH
For welding of aluminum-killed steel for low-temperature service
- AWS
- A5.1 E7018-1 H4R
- KS
- D 7006 E5016
- JIS
- Z 3211 E4918-1 H5
- EN
- -
| Applications | Welding of LPG tankers, LPG storage tanks equipment for low-temperature service, and off-shore structures to be used at low-temperature districts. |
|---|---|
| Characteristics | 1. LC-318NH is an iron powder Extra hydrogen type covered electrode to be used in all-position welding of aluminum-killed steel for low-temperature service and with good crack resistibility. 2. It provides excellent notch toughness at -45℃ and good usability in direct current welding. |
| Notes on usage | 1. Pay attention not to exceed heat-input because excessive heat-input causes deterioration of impact values of weld metal. 2. Dry the electrodes at 350-400℃ for about one hour before use. 3. Adopt back step method or strike the arc previously on a small steel piece to prevent blowholes at the arc striking in a groove. 4. Keep the arc as short as possible. |
| Shielding Gas | - |
| Certification | ABS | - | BV | - | |
|---|---|---|---|---|---|
| CCS | - | CWB | - | ||
| DNV | - | GL | - | ||
| JIS | - | KR | - | ||
| KS | - | LR | - | ||
| NK | - | RINA | - | ||
| TUV | - | ||||
| MSDS |  |
Handbook | |
||
| DOP Attachment | - | ||||
