HOME > Products > >

>Mild ＆ High Tensile Steel

CA-508 x UC-36

For multi-layer welding of aluminum-killed steel for low temperature service


Applications	Butt welding of aluminum-killed steel for low temperature service used in offshore structures, steel pipes, chemical vessels, low temperature service equipment, and other structures for cold regions.
Characteristics	(1) Excellent notch toughness at low temperature down to -60℃. (2) Crack resistibility, pockmark and porosity resistibility are excellent. (3) Slag detachability and bead appearance are very good. (4) Suitable for multi-layer welding of TMCP steel. (5) Applicable to both AC and DC(+).
Notes on usage	(1) Store the flux at the place of moisture free and dry the flux at 250~350℃ for about one hour before use. (2) Remove rust, scales, oil, paint, water, dirt and slag of tack welds from the groove in order to get sound welds. (3) In case of multi-layer welding, use welding current and speed as low as possible at the first layer of groove to avoid cracking. (4) The use of the flux which has been re-used for welding in many times may cause deterioration of its usability. Therefore, the unused flux should be mixed properly with such used flux.
Shielding Gas	-