>High Tensile Steel
LC-600
LC-600 is an extra low hydrogen type electrode for all-position welding, which providesgood notch toughness of weld metal at low temperature.The usability and X-ray soundness of weld metal are good in all-position welding. As thehydrogen content of the weld metal is especially low, the crack resistibility is good.
- AWS
- A5.5 E9016-G
- KS
- D 7006 E5816
- JIS
- Z 3211 E6216-N1M1
- EN
- ISO 2560-A E 50 3 Z B 1 2
ISO 2560-B E5716-G A U
| Applications | Welding of 60kgf/mm2 class high tensile strength steel for pressure vessels, penstocks, bridges, offshore constructions, vehicles and machinery. |
|---|---|
| Characteristics | LC-600 is an extra low hydrogen type electrode for all-position welding, which provides good notch toughness of weld metal at low temperature. The usability and X-ray soundness of weld metal are good in all-position welding. As the hydrogen content of the weld metal is especially low, the crack resistibility is good. |
| Notes on usage | (1) Dry the electrodes at 350~400℃ about one hour before use. (2) Adopt back step method or strike the arc on a small steel plate prepared for this particular purpose because arc striking on base metal is in danger of initiating cracking (3) Keep the arc as short as possible. (4) Preheat at 50~150℃ before use. (5) Pay attention not to exceed proper heat-input because excessive heat-input causes deterioration of impact values and yield strength of weld metal. |
| Shielding Gas | - |
| Certification | ABS | - | BV | - | |
|---|---|---|---|---|---|
| CCS | - | CWB | - | ||
| DNV |  3YH10 |
GL | - | ||
| JIS | - | KR | - | ||
| KS | D 7006 E5816 |
LR | - | ||
| NK | - | RINA | - | ||
| TUV | - | ||||
| MSDS | |
Handbook | |
||
| DOP Attachment | - | ||||
