>Mild & High Tensile Steel

MF-50T
-
- AWS
- A5.18 ER70S-6
- KS
- D 7025 YGW12
- JIS
- Z 3312 YGW12
- EN
- ISO 14341-A G 42 A 3 C1[M21] Z
ISO 14341-B G 49 A 3 C1[M21] S12
Applications | Butt and filler MAG welding of structures such as automobiles, vehicles, electric appliances, ships, steel frame, bridges in all position. |
---|---|
Characteristics | 1. MF-50T is a solid wire whose arc stability is good at low current ranges (short-circuiting arc range) and spatter loss is low. 2. It is suitable for all-position welding of steel sheets by CO2or Ar+CO2mixturedgas shielding, for higher speed welding. 3. The arc stability is good in wide range of current. |
Notes on usage | 1. Flow rate of shielding gas (CO2) should be 20ℓ/min generally. 2. Flow rate of shielding gas should be 25~30ℓ/min under the condition of 2m/sec wind speed and use wind screen under the condition of over 2m/sec wind speed. 3. Keep the distance between tip and base metal within 10~20mm at less than 300A Welding current and within 20~25mm at over 300A. |
Shielding Gas | 100% CO2 |